What To Do When Your Key Is Stuck in the Ignition

This can be a panic-inducing problem, but don't fear because there are several ways to solve it yourself.
Andrew P. Collins

Share

We may earn revenue from the products available on this page and participate in affiliate programs. Learn more ›

If you’re driving a car that uses a physical key and it seems to be stuck in the ignition, the first thing to do is make sure your car’s in park—it won’t come out if you’re still in drive. If that’s not it, don’t panic yet, we have a few more things to try.

Dealing with a stuck key is typically an easy problem to solve that can take between a few seconds to a couple of hours to sort out, depending on whether or not you need to actually replace the ignition module. That job is moderately difficult, though we’ll cover that too.

Sometimes, you just can't get the key out.
Sometimes, you just can’t get the key out. DepositPhotos

To get a sticky key out of the ignition, you might just need some careful dexterity, or possibly some lock lubricant like this, this, or this.

To complete an ignition module replacement, you’ll need a screwdriver set with various flathead and Phillips head screwdrivers, pliers, a replacement key, and a replacement ignition switch for your car specifically.

If your car’s older, you might be able to get away with a universal ignition switch. You’ll also want to refer to a maintenance manual regularly for your exact car. We’ll provide the overview and universal tips, however, it’ll be worth doing some research on how the process works for your car specifically before committing to diving in.

What To Do When Your Key Is Stuck in the Ignition

Step 1: Make Sure You’re in Park

If you shut your car off before putting it in park, you probably won’t be able to get the key out. This is a common user error—make sure your shifter is in “P” before you get too nervous. If it’s still in drive, just put it in park and try the key again. If that works for you, great!

Did you shut your car off while it’s still in drive? That would prevent your key from coming out of the ignition. Put it in “P” then try again. Adobe

If not, don’t panic. This is still a very solvable problem.

Step 2: Try a gentle, but deliberate, motion in jiggling the key

Maybe you’ve got an old worn key, or maybe some pocket lint got caught on it. Try a gentle giggle. Just be careful not to force anything, keys can bend or break more easily than you might expect.

It’ll be worth also moving the steering wheel a little bit; it’s possible that you activated the steering lock and your key got caught.

Step 3: Check for buttons near the ignition

There might be some kind of unusual or aftermarket locking system in the ignition. Look around for a button near where the key goes in, especially if you’re in a new-to-you car.

This stuff is great, just be careful where you squeeze the tube—it’s liable to fly everywhere and is so small it can get stuck in your fingerprints for days. Andrew P. Collins
Step 4: Try a lock lubricant

You can find lock lubricant online (like this, this, or this linked earlier) but it’s also readily available at hardware stores and auto parts stores.

Ideally, you’d squirt it in with the key out of the cylinder, but since that’s not possible, you’ll just have to aim a little more carefully to get it in. It should still be doable, though.

Word to the wise: Pick one lock lube and stick with it. If you try a dry one and then a wet one, they might adversely interact with each other and create an even stickier situation than what you started with.

Step 5: Call an old car specialist

If you’ve tried the above and still aren’t having luck, Google around for mechanics that work exclusively on your car’s make. You might get lucky and find somebody who knows that “one weird trick” that works on a stuck key for these cars, and that’s a straightforward enough question that you might actually be able to get advice over the phone.

Don’t bother with dealerships, though. Most of them probably haven’t seen a physical key in years.

Step 6: Prepare to replace the ignition module

If that key is really good and stuck, you may indeed have to replace the ignition module. So now you get to decide if you want to do that yourself or outsource it. Call a locksmith or a shop or get ready to DIY. If the key isn’t even turning, you might want to cough up the cash for a pro to deal with it.

If the key won’t come out but it will still turn, an ignition module replacement is not necessarily all that hard. Read on if you’re giving it a shot.

Step 7: Disconnect battery and access steering column

Disconnect the negative terminal on your vehicle’s battery. Now you can remove the trim from around the steering wheel. There will be more than one piece to remove, but the specific number will depend on the make and model of your vehicle. Move carefully; these plastics can get brittle after years of sitting in the sun. Triple-check you’ve removed any and all screws before yanking on anything too hard.

Step 8: Turn your key to accessory mode

Insert the key and turn the switch to accessory mode but don’t start the car.

Step 9: Remove Ignition Module 

Press the release pin on the bottom of the ignition switch with a screwdriver. This will require a narrow screwdriver to fit into the small hole. The ignition module should slide right out once the pin has been released.

Step 10: Insert New Ignition Module

Squeeze the release pin on the new module and slide it into the ignition hole on the side of the steering column. You should hear a click when the pin has properly seated itself. Keep working the switch until you hear the sound.

Replacing the ignition and key are the best way out of this mess.
Replacing the ignition and key can be the best way out of this mess. DepositPhotos
Step 11: Test new ignition switch

Before reassembling the interior trim, you’ll need to test the new switch. To do this, reconnect the battery and make sure you’ve installed the new ignition switch properly. The vehicle should crank right up, and you should be able to insert and remove the key freely. If that’s not the case, you’ll need to review the steps you took to install the switch.

If the vehicle cranks properly, you’re almost done. Turn the ignition back to the off position and disconnect the battery again. 

Step 12: Reinstall interior 

Reinstall the pieces of your vehicle’s interior, being sure to replace them in the order that they were removed.

Step 13: Reconnect battery, make final interior checks

Now just reconnect the battery, and your work is done.

Final Tips for Replacing a Broken Ignition Switch

If you’re not hearing any noise from the starter motor when you turn the key, the issue might be under the hood and not in the ignition switch. So make sure the key isn’t the problem before you start disassembling your car’s steering column.

One of the most likely culprits for a stuck ignition key is the steering wheel locking mechanism. When a vehicle is parked, the steering wheel can lock. That’s great for theft prevention, but it also prevents the key from turning or being removed from the ignition switch. In some cases, the ignition or vehicle isn’t the problem. It can be a worn or damaged key that has lodged itself in the ignition switch. Pulling or yanking on the key can cause major damage to the ignition and might make it even harder to remove the key.

Video

If you’d like a video to follow while working on your ignition switch, check out the one below by The Original Mechanic.